Philips WP3892, Руководство пользователя

Страница: 20 / 144

20
12 Troubleshooting
The filter indicator flashes.
Filter life coming to an end. Buy and install new
filter.
The filter indicator lights up continuously.
You need to replace the filter. Replace the filter
(see chapters ‘Cleaning and maintenance’ and
‘Replacement’).
The battery indicator flashes red.
The battery is almost empty. Switch on the
appliance to let the battery charge.
The battery indicator flashes green.
The battery is charging.
The water availability indicator lights up
continuously.
Water is not available or the water pressure
is below 0.5 bar. In the AUTO mode, you can
program the appliance to dispense a particular
amount of water. If the water supply stops, the
appliance will dispense the set amount of water as
soon as the water supply resumes.
Water drips from the appliance.
One or more pipes inside the appliance are
not connected properly. Check all connections.
Contact your dealer or an authorised Philips
service centre.
The UV indicator lights up continuously.
An error occurred in the UV chamber. Check
if the cover of the UV chamber is closed. Clean
the quartz tube (see chapter ‘Cleaning and
maintenance’). If the problem persists, contact
your dealer or an authorised Philips service centre.
The appliance does not dispense water, even
though there are no error indications.
The filter has not been placed properly. Place
the filter properly
You have not used an original Philips
replacement filter. Always replace the filter with
an original Philips filter, type WP3990.
The fuse has blown due to voltage fluctuations.
Contact your dealer or an authorised Philips
service centre.
The filter has expired before the appliance
has purified 3000 litres of water. Replace the
filter (see chapters ‘Cleaning and maintenance’
and ‘Replacement’).
The indicators do not flash after I press the
power-on button.
The indicators are damaged. contact your dealer
or an authorised Philips service centre.
•
•
•
•