Philips WP3870, Руководство пользователя

Страница: 9 / 54

6 If the water outlet has 3/4” thread, screw the adapter ring onto the
water outlet first. Then attach the water supply connector and finally
screw the original kitchen faucet onto the water supply connector.
Wind Teflon tape round all threaded parts to prevent leakage.
Note: If the water outlet is a secondary water outlet, screw the cap onto the
open end of the water supply connector.
7 Take the water purifier out of its packaging and put it on a flat
surface. Then pull the lock lever to unlock the water reservoir
cover (1) and remove it from the water reservoir (2). Now you can
remove the water reservoir from the wall holder.
8 Clean the outside of the water reservoir and its cover (see chapter
‘Cleaning and maintenance’).
9 Swing the transport lock to the left and push it into the wall holder.
10 Turn the elbow connector located on the rear of the wall holder to
the left or right, depending on the location of the water outlet you
want to connect it to and push the hose in its slot.
11 Attach the wall holder with the screws to the wall. Make sure the
hose remains properly positioned.
- The fixing plugs and screws are supplied with the water purifier.
3/4
“
1
2
English
9