Philips VR605/07, Руководство пользователя

Страница: 24 / 28

Automatic switch-off (tuner mode)
If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver (tuner).
a
Hold the
STOP
h button until + appears on the video
recorder display.
b
Select the programme number you want with the
P
r or
P
q button or with the number buttons
0-9
.
c
Switch off the video recorder with the
STANDBY
m button,
if you no longer want to watch TV.
Reducing picture disturbance (’optimizing
the modulator’)
You may experience picture disturbance if you have not used
a scart cable to connect your video recorder and TV. This is
because another TV station in your reception area may
already be using UHF-channel CH35 or 583MHz.
a
Make sure that there is no cassette in the video recorder.
On the video recorder, hold the
SYSTEM
button for a few
seconds until e.g.: ’ M583 ’ (583Mhz/channel 35) appears
in the display. The video recorder transmits a test picture
on this UHF-channel (or this frequency).
MODULATOR 583
------------------------
-/+
ON/OFF
g
CL OK
D
When you press the I button, the video recorder
will search for the next modulator frequency.
b
Confirm the new modulator frequency with the
OK
button.
c
Tune in the TV set to this channel or frequency.
d
To end, press the
STANDBY
m button.
Switching off the modulator
If you cannot clear picture or sound interference, you can
switch off the built-in modulator.
You should only do this if you have connected the video
recorder to the TV set with a scart cable. ’Connecting VCR
without scart cable’ is not possible when the modulator is
switched off.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Make sure that no cassette is in the video recorder. On
the video recorder, press the
SYSTEM
button for several
seconds, until, for example, ’ M583 ’ appears on the video
recorder display.
c
Confirm the new modulator frequency with the
OK
button.
d
Tune in the TV set to this channel or frequency.
e
To end, press the
STANDBY
m
button.
f
Hold the
CLEAR (CL)
button, until ’MOFF’ (modulator off)
appears on the video recorder display. If you want to
switch the modulator on again, hold the
CLEAR (CL)
button, until ’ M583 ’ (Modulator switched on) appears on
the display.
g
To end, press the
STANDBY
m button.
22