Child lock
This function will prevent unauthorised use of your video
recorder. All button-functions will be locked.
D
You can make programmed recordings while the
child lock is on.
a
With the video recorder switched on, press the
STANDBY
m
button on the remote control.
’
{
’ will appear on the video recorder display.
Keep the remote control in a safe place.
b
If you want to switch off the child lock, press the
STANDBY
m
button again.
’
{
’ will disappear from the video recorder display.
D
If you press a button when the child lock is on, ’
{
’
will flash on the display for a few seconds.
Setting the on-screen display (OSD)
You can switch the on-screen display of the current operating
information on or off.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
MENU
button on the remote control. The main
menu will appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOINSTALL
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+
OK
c
Select the line ’
OSD
’ with the
P
r
or
P
q
buttons and
confirm with the
OK
button.
d
Select one of the options shown with the
P
q
button.
’
ON
’
: Shows the OSD for a few seconds only.
’
OFF
’
: Switches off the OSD.
e
Confirm with the
OK
button.
Switching the remote control command
If you have two video recorders with the same remote control
command, you can change the remote control command of the
remote control for one of the video recorders.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
MENU
button on the remote control. The main
menu will appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOINSTALL
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+
OK
c
On the remote control, press the
SELECT
button and
button
2
at the same time, to switch the remote control
to VCR 2.
D
If you want to switch back to VCR 1, press the
SELECT
button and button
1
at the same time.
d
Confirm with the
OK
button.
On the TV screen, for example, VCR 2 OK will appear.
Then the video recorder automatically switches off.
D
If you change the batteries of the remote control, it
will switch back to VCR 1.
Continuous playback
You can automatically play a cassette again and again. When
the video recorder reaches the end of the tape or the end of
the recording, it will rewind and start again.
a
Put a cassette in the machine.
b
Press the
PLAY
G
button.
c
Press the
MONITOR
button on the remote control and the
PLAY
G
button on the video recorder at the same time .
On the video recorder display you will see:
REP
d
If you want to cancel continuous playback, repeat step
c
.
D
During continuous playback, no other button will
work. After a power failure, playback will
automatically start again.
7.
ADDITIONAL FUNCTIONS
21
