Philips VR287, Руководство пользователя, Страница: 2 / 16

Programming with ’VI’
All the information required for a programming is encoded in the VI code.
1
Switch on the TV set.
2
Press the
TIMER
k button on the remote control.
3
With the digit buttons
0-9
, enter the VI code (up to 9 digits) printed in your TV guide next to the
start time of a TV programme.
If you make a mistake, clear with the
CLEAR (CL)
button.
4
If you want to programme at daily or weekly intervals, press the SELECT button until ’D-DAILY’ (daily inter-
vals) or ’W-WEEKLY’ (weekly intervals) appears in the display. The ’daily intervals’ function can only be used
for recordings to be made from Mondays to Fridays inclusive.
5
Confirm the entries with the
OK
button . The resultant data appears on the TV screen.
Note: If you use VI for the first time for this TV channel, the line ’SELECT PROG’ appears when you
confirm the VI code. Instead of ’E2’, select the programme number for this particular TV channel,
using the digit buttons
0-9
and confirm with the
OK
button.
* Switch ’VPS’ or ’PDC’ (V/P) on or off with the
SELECT
button.
* If you wish to set a later end time for a recording, press the
P
q button at step
5
. Each time you press
the
P
q button you will add 15 minutes to the end time.
* If e.g.: ’20:00’ flashes in the display, please set the clock.
6
Finally, press the
OK
button. Programming is now complete.
The data has been stored in a TIMER block.
7
Make sure that a cassette without erase protection has been loaded. Switch to standby with the
STANDBY
m
button.
A programmed recording will only function when the video recorder is switched to standby with the
STANDBY
m
button.
How to programme a recording manually
1
Switch on the TV set. Press the
TIMER
k button twice .
2
Select a free TIMER block, using the
P
q
or the
P
r
button. Press the
TIMER
k
button.
DATE PROG START V/P END
01 01 20:00 21:30
------------------------
NEXT
g
TIMER CLEAR
g
CL
-/+ 0-9 D/W
g
SELECT OK
3
With the
TIMER
k the C or the D button you can select between the entries ’DATE’ (date), ’PROG’
(programme number), ’START’ (start time) and ’END’ (end time).
You can enter or adjust data, using the
P
q or the
P
r button or the digit buttons
0-9
. Confirm each
entry with the
TIMER
k button.
You can switch ’VPS/PDC’ (’V/P’) on and off at step ’START’ with the
SELECT
button.
You can select between ’D’ (daily intervals) or ’W’ (weekly intervals) at step ’DATE’ with the
SELECT
but-
ton.
4
Finally, press the OK button. Programming is now complete.
5
Make sure that a cassette without erase protection has been loaded. Switch to standby with the
STANDBY
m button.
A programmed recording will only function when the video recorder is switched to standby with the
STANDBY
m button.
Note:
* Clear a TIMER-block:
After step
1
, select the TIMER block you want to clear with the
P
q or the
P
r button. Press the
CLEAR (CL)
button.
* If e.g.: ’20:00’ flashes in the display, the clock must be set.
&