Philips VR287, Руководство пользователя, Страница: 14 / 16

On Screen Display (OSD)
You can switch the On Screen Display (OSD) on or off.
1
Switch on the TV set. Press the
AUTOINSTALL
button on
the video recorder.
2
With the
P
q
or
P
r
button, select ’OSD’. Confirm with
the
OK
button.
3
With the
P
q
button, select ’ON’ or ’OFF’. Confirm with
the
OK
button.
Note: With the
OK
button you can superimpose the actual
operating mode on the TV screen.
Channel number or frequency display
You can switch between the display for ’channel number’ or
’frequency’ for manual channel search.
1
Press the
AUTOINSTALL
button.
2
With the
P
q or
P
r button, select
’CHANNEL/FREQUENCY’. Confirm with the
OK
button.
3
With the
P
q button. select ’CHANNEL’ or ’FREQUENCY’.
Confirm with the
OK
button.
Manual channel search
In certain cases the ’Automatic channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the TV channels.
1
Switch on the TV set. Press the
AUTOINSTALL
button on
the video recorder.
2
With the
P
q ot
P
r button, select ’MANUAL SEARCH’.
Confirm with the
OK
button.
3
Hold the
P
q button until you have found the right TV
channel. A changing channel number or frequency will
appear on the TV screen.
4
Confirm with the
OK
button.
5
With the
P
q or
P
r button or the digit buttons
0-9
,
select the programme number that you wish to give to this
TV channel (e.g.: ’P 01’).
6
Confirm with the
OK
button.
If you want to allocate more TV channels, repeat steps
3
to
6
until all TV channels have been stored.
7
To end, press the
STANDBY
m
button.
Note: Channel number or frequency can also be entered
directly at step
3
, using the
0-9
buttons.
* To enter a special/hyperband channel, first enter the
channel digit ’9’. The indication changes from ’CH’ to ’CA’.
For example, for special channel ’S 30’, enter ’9 30’.
*
Allocating a decoder: If you want to allocate a decoder,
press the
INDEX
E
button at step
3
until ’DEC’ appears in
the display.
12