Philips VR1010/75, Руководство пользователя

Страница: 27 / 31

— 28 —
LP 20917-003
VHF/UHF
IN
ANT.
OUT
TV
VIDEO
L
R
AUDIO
(MONO)
OUT IN
IN OUT
S-VIDEO
LP
20917-003
VHF/UHF
IN
ANT.
OUT
TV
VIDEO
L
R
AUDIO
(MONO)
OUT IN
IN OUT
S-VIDEO
Tape Duplication
1 Connect the recording VCR (this VCR) and the playing
VCR.
2 Connect the recording VCR (this VCR) to the TV.
Connection
Diagram
Dubbing from any VHS VCR (or video
camera) to another is simple.
Explanations on this page uses this
VCR as the recording VCR.
Refer also to the manual supplied with
the other VCR (for playback).
You can also use the AUDIO/VIDEO
input jacks on the front panel to
connect another VCR or video camera
using the audio/video cable (RCA pin-
type).
Recording VCR (this VCR)
1
At VCRs
Insert a source tape in the playing VCR
and a blank tape in the recording VCR.
• If a tape without the record tab is inserted
in the playing VCR, playback automati-
cally starts. In this case, press the
STOP
button.
2
At TV
Turn the channel on the TV to your
video channel.
3
Select Line Input
Press CH
5 or ∞, pointing the remote
control at this VCR, to select the
external line input.
• For rear jacks, select “L-1” on the
display or “A/V IN ” on the TV
screen.
• For front jacks, select “L-F” on the
display or “F- A/V IN ” on the TV
screen.
Playing VCR
4
Select Tape Speed
Press ALT/SPEED , pointing the
remote control at this VCR, until the
desired tape speed (SP, LP or SLP)
appears on the display.
SP, LP
: For PAL signal
SP, SLP : For NTSC signal
5
Play Back Tape
Press the PLAY
3 button on the
playing VCR.
6
Record (Copy) Tape
Press REC/OTR a at this VCR.
Remember: press the buttons in steps 5
and 6 simultaneously to avoid missing
any of the recording.
TV
To RF OUT
From Audio output to AUDIO IN
From Video output to VIDEO IN
S-VIDEO OUT to S-VIDEO IN
A
DVANCED
O
PERATIONS
(C
ONTINUED
)
vr1010/75 00.6.29, 4:54 PM 28