Philips VL1000 AI, Руководство по обслуживанию

Страница: 39 / 172

M
AINTENANCE
:
2
0 2 . 9 6 6 3 . 0 0 1 0 F 14-May-2009 21
Step 3. Carefully pull backcap straight out of rear head assembly. (It will still be
attached by lamp wires and tether.)
Step 4. At backcap, flip two bail clamps outward ( Figure 2-2 ).
Step 5. Flip two base clamps outward away from socket.
Step 6. Grip lamp by base and firmly install in socket.
Step 7. Close base and bail clamps, locking into place.
Figure 2-2: Installing Incandescent Lamp in Socket
Step 8. Re-install backcap, ensuring that alignment studs and holes are aligned
( Figure 2-1 ).
Step 9. Align lamp. (Refer to “Align Lamp For Maximum Beam Irradiance” on
page 24 .)
Lamp
Bail Clamps
Base Clamps
Socket
Flip bail clamps outward.
Flip base clamps outward.
Install lamp, firmly pressing into place.
Close base clamps.
Close bail clamps.
1
2
3
4
CAUTION:
Do not touch lamp
with bare fingers.