12
•
Press the
key to increase the dwell time. Dwell times
may be programmed from SKIP to 9 seconds (when you
reach 9 seconds, pressing the
key will toggle you
through the sequence again). A setting of
SKIP
removes the
channel from the sequence. The
SKIP
setting is also used to
disable display of the on-screen
Vid Loss
message on input
channels that will have no camera connection.
•
Select
EXIT
and press the
key to exit the menu.
5.5
Alarm Setup
The
ALARM SETUP
menu allows you to set the alarm options
for each of the video inputs. These options include alarm
on/off, dwell time, polarity, and video loss. The unit can also
have the audio beeper set to on or off.
•
Select
ALARM SETUP
and press the
key. The
following menu is displayed:
5.5.1
Set Up an Alarm Channel
You can switch the alarm function ON/OFF for each of the
four video input channels.
•
Select
ALARM ON/OFF
and press the
key. The
following menu is displayed:
•
Press the
and
keys to move the cursor to the
required channel.
•
Press the
key to toggle the channel
ON
or
OFF
.
•
Select
EXIT
and press the
key to exit the menu.
5.5.2
Alarm Dwell Time
The
ALARM DWELL
function allows you to set the automatic
reset period after an alarm is generated.
•
Select
ALARM DWELL
and press the
key. The
following menu is displayed:
•
Press the
and
keys to adjust the time. Options are as
follows:
■
1-60 SEC
: automatic reset period.
■
HOLD
: alarm continues until the alarm camera key is
pressed followed by the
key.
■
FOLLOW
: alarm continues until the alarm input
signal is reset or the alarm camera key is pressed
followed by the
key.
•
Press the
key to exit the menu.
5.5.3
Alarm Polarity
The
ALARM POLARITY
function enables you to define how
the alarm is generated for each alarm input, either normally
open (NO) or normally closed (NC) contacts.
•
Select
ALARM POLARITY
and press the
key. The
following menu is displayed:
•
Press the
and
keys to move the cursor to the
required channel.
•
Press the
key to toggle the channel
NO
or
NC
.
•
Select
EXIT
and press the
key to exit the menu.
NOTE:
Alarm functions are disabled when in the menu or
VCR mode.
>
>
ALM ( )
ALM ( )
>
>
>
>
ALARM SETUP
(1) ALARM ON/OFF
(2) ALARM DWELL
(3) ALARM POLARITY
(4) VIDEO LOSS ALERT
(5) BEEPER: ON
(6) EXIT
ALARM ON/OFF
(1) CHANNEL 1: ON
(2) CHANNEL 2: ON
(3) CHANNEL 3: OFF
(4) CHANNEL 4: ON
(5) EXIT
AUTO RESET TIME
60 SEC
ALARM POLARITY
(1) CHANNEL 1: NO
(2) CHANNEL 2: NO
(3) CHANNEL 3: NO
(4) CHANNEL 4: NO
(5) EXIT