Philips VARI LITE VLZ SPOT Luminaire Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 84

background image

5

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE
EXPOSURE TO UV RADIATION

1.

Many VARI LITE luminaires use a LED that produces UV radiation. DO NOT look

directly at LED.
2.

It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet

screens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired. For example, by cracks or deep scratches.

WARNING: INSTRUCTIONS FOR PROTECTION AGAINST INJURY TO PERSONS
1.

Exterior surfaces of the luminaire will be hot during operation. Use appropriate safety

equipment (gloves, eye protection, etc.) when handling and adjusting hot equipment and
components.
2.

Luminaires will have a hot LED when operating. Disconnect power and allow LED to

cool before replacing.
3.

LED emit ultraviolet radiation which can cause serious skin burn and eye inflammation.

Additionally, arc LED operate under high pressure at very high temperatures. Should the LED
break, there can exist a danger of personal injury and/or fire from broken LED particles being
discharged.
4.

Wear eye protection when relamping.

5.

Appropriate safety equipment (gloves, eye protection) should be used when handling

damaged LED.
6.

If LED is touched with bare hands, clean LED with denatured alcohol and wipe with

lint-free cloth before installing or powering up the luminaire.
7.

The LED shall be changed if it has become damaged or thermally deformed.

WARNING: RF INTERFERENCE
1.

This is a Class A product. In a domestic environment this product may cause radio

interference, in which case, the user may be required to take adequate measures.

LED CHARACTERISTIC CONSIDERATIONS
1.

LED require a period of time to relight after a power interruption or a severe voltage dip.

In some cases, LED will automatically relight after it has cooled depending on Power-Up
State configuration setting.
2.

Burning position is Universal.

VARI

LITE VLZ SPOT Luminaire User’s Manual

«
...
4
5
6
7
8
...
»

Содержание VARI LITE VLZ SPOT Luminaire





















































































Отзывы:

Нет отзывов

Похожие инструкции для VARI LITE VLZ SPOT Luminaire

Бренд: Rain Bird Страницы: 2

Бренд: VBM Страницы: 36

Бренд: W&H Med Страницы: 122

Бренд: Rath Страницы: 5

Бренд: Garden Treasures Страницы: 2

Бренд: Zimmer Страницы: 54

Бренд: Zimmer Страницы: 4

Бренд: Zimmer Biomet Страницы: 23

Бренд: Zimmer Страницы: 16

Бренд: Zimmer Страницы: 2

Бренд: Zimmer Страницы: 32

Бренд: Zimmer Страницы: 96

Бренд: Vaisala Страницы: 2

Бренд: stilum Страницы: 4

Бренд: Cooper Страницы: 10

Бренд: Korg Страницы: 32

Бренд: Godox Страницы: 8

Бренд: Festo Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды