manualshive.com logo in svg

Philips VARI-Lite VL4000, Руководство пользователя

Поделиться
Скачать
Philips VARI-Lite VL4000 Скачать руководство пользователя страница 83

 M

ENU

 S

YSTEM

 : M

ENU

 O

PERATION

4

0 2 . 9 7 0 4 . 0 0 0 1   D

0 3   F e b r u a r y   2 0 1 5

65

LCD Display and Menu System Operation

The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and 
make changes to the menu items. When the desired menu item is reached, press the desired Menu 
Button to display the menu options and to navigate and configure the menu options as required.

To navigate and access menu settings/selections:

Step

1. Make sure unit is powered and turned on.

Step

2. Press [ESC] to access menu categories.

Step

3. Use four Arrow (



) buttons to navigate through the various options and settings.

Step

4. Once menu item is reached, press [OK] to access the menu item parameters.

Step

5. Make changes to parameters as desired.

Step

6. Press OK [Enter] button to accept changes.

DMX Address

To set, edit, and save a DMX address:

Step

1. Press [ESC].

Step

2. Press [Up] / [Down] arrows until 

Address

 appears. Press [OK].

Step

3. Use [Left] and [Right] arrow buttons to scroll through all digits.

Step

4. Once at desired digit, use [Up] and [Down] arrows to change highlighted digit. 

Step

5. Once digit is set, use [Left] and [Right] arrow buttons to set other digits in DMX address.

Step

6. Once all digits are set in DMX address, press [OK] to set.

Step

7. DMX address will display and is saved.

Operational Modes - Standard and Studio

The VL4000 Spot Luminaire offers users the choice of two operational modes that are selectable 
through the luminaire's menu system:

•

Standard Mode

 

(default) 

- luminaire's cooling fans are set to maximum cooling to allow the 

luminaire to output up to 33,000 lumens. In Standard Mode, the fixture can operate in 
environments up to 104

o

 

F / 40

o

 

C.

•

Studio Mode

 - luminaire's cooling fans are slowed to afford quieter operation where noise could 

be a concern. The lumen output of the fixture is reduced to minimize the heat produced by the 
luminaire's lamp. In Studio Mode, the fixture can operate in environments up to 122

o

 

F / 50

o

 

C.

Note:  

The operational mode can be changed at any time during use via the control channel. This 

allows the unit to be put in Studio mode only for particular instances or scenes within during its use.

Содержание VARI-Lite VL4000























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды