Philips Vari-lite VL3500 Wash FX Luminaries, Руководство пользователя

Страница: 35 / 100

I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
02.9686.0001 B 01 June 2009 17
Installing in Truss:
Step 1. Using two people, lift luminaire into mounting position.
Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g.
wing bolt) is properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (as required) as follows:
a. Connect one end of cable to luminaire handle.
b. Loop at least once around truss/pipe and attach other end of cable to other handle.
Step 4. Connect power and data cables according to procedure given in “Connecting Data and
Power” on page 18 .
Figure 2-4: Hanging Configuration and Dimensions
Handles are approved
safety cable anchor points.
18"
(457 mm)
14.5"
(368 mm)
6"
(152 mm)
23" (584 mm)
28"
(711 mm)
20"
(508 mm)
27"
(686 mm)
12" (305 mm)
Safety Cable:
Recommended for all hanging installations
and may be required by local codes.
Safety Cable
(not included)
Top View
Loop at
least once
Tilt Axis
27"
(686 mm)
Head Length
Light Beam Projects Intense Heat:
Do not illuminate objects within 3.5 m (11.5 feet).
See Warnings and Cautions in this chapter.