background image

 

16

 
 
Limited One-Year Warranty 

 
 

Philips warrants that this product shall be free from defects in material, workmanship and 
assembly, under normal use, in accordance with the specifications and warnings, for one year 
from the date of your purchase of this product.  This warranty extends only to the original 
purchaser of the product, and is not transferable.  To exercise your rights under this warranty, 
you must provide proof of purchase in the form of an original sales receipt that shows the 
product name and the date of purchase.  For customer support or to obtain warranty service, 
please call 919-573-7863.  THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES.  
Philips’ liability is limited to repair or, at its sole option, replacement of the product.  Incidental, 
special and consequential damages are disclaimed where permitted by law.  This warranty 
gives you specific legal rights.  You may also have other rights that vary from state to state.  

 
 
 

FCC compliance  

 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:  
 
1. This device may not cause harmful interference, and 
2. This device must accept any interference received, including interference that may cause 
undesired operation.  

 
Note!
  

 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:  
 
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment to an outlet on a circuit different from that to which the receiver is 
connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
 
Any unauthorized modification to this equipment could result in the revocation of the  
authorization to operate the equipment. 
 

 
 

Содержание US2-P44418A

















Отзывы: