Note
Single earpiece (Mono mode)
Take either right or left earpiece out
from charging box for mono use. The
earpiece will power on automatically.
There will be a voice “power on” from
earpiece.
Note
Put both L and R earpieces back into power
case and then take the 2 earpieces out to pair
and connect Bluetooth again.
If still not works, try to reset. Put L and R into
power case and press the button for 4 seconds
until the white LED flashes. Then take L and R
out of power case and select BT, connect
Bluetooth again.
The earphones store 1 device in the memory. If
you try to pair more than 2 devices, the earliest
paired device is replaced by the new one.
Pair the earphones with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the
earphones, make sure the Bluetooth
function in any other previously paired
or connected devices are turned off.
Then follow the steps in “Pair the
earpieces with your Bluetooth device at
the first time”.
