Philips SWW1810, Руководство пользователя

Страница: 18 / 60

18
9 Frequently asked question
The power LED on the
receiver is not lit up in red in
standby mode. Make sure that there is power supply for the transmitter and
receiver.
There is no video displayed on
my TV screen. Make sure that the appropriate cables are selected and inserted
to the transmitter, receiver, and HDTV.
Make sure that you select HDMI as the input source on your
HDTV.
Check the power LED and SOURCE LED on the receiver:
Flashing blue power LED: Make sure that the transmission
range between receiver and transmitter is not over 65 feet
transmission distance. Move the transmitter closer to the
receiver.
1)
Make sure that the frame rate and video resolution of your
$ #
%
2) Connect the source device to
your TV with an HDMI cable to check the compatibility of
the video format.
3) Make sure that the video solution your
$ ' ” %
! "#
Make sure that the proper cables are connected among the
transmitter, receiver and HDTV.
2) Make sure that the source
devices connected to the transmitter are powered on.
If the picture quality is poor,
what do I do? Make sure that the video resolution of your source device
matches the resolution of your HDTV.
Make sure that the transmission range between receiver and
transmitter is not over 65 feet transmission distance.
Tip
For information, see the chapter on ‘Technical data’.
I cannot hear any sound or the
sound is poor, what do I do? Make sure that the TV volume is adjusted correctly.
Make sure that the TV volume is not set to minimum or the
sound is not muted.
Make sure that the audio format is supported.
Make sure the HDMI cable of the transmitter is connected
correctly.
Tip
ƒ ” ” %
EN
UYYAAWOA'0KPFF