Philips Streamium WACS7000, Руководство пользователя

Страница: 60 / 199

60
English
14.1 Reset
If desired, you can restore the Center or Station
to their default settings (including the network
settings).
Helpful hint:
– Restoring to default settings does not delete any
stored music tracks
When to reset the Center or Station:
– Resetting the Center or Station helps to re-
establish the Wi-Fi connection between the
Center and Station.
– Change the way the Center or Station
connects to an external Wi-Fi/wired network.
1
Check that the set is switched on (see 5.Basic
functions ).
2
Press MENU to enter the menu screen
3
Press the navigation controls
3
or
4
and
2
to
enter Settings followed by Restore settings.
4
Press
2
to select Yes
➜
The set is rebooted. Language selection
screen appears.
5
Select your desired language: English, Français,
Español, Nederlands, Italiano or Deutsch
➜
The set enters Installation Mode
➜
The search for Center or Stations starts.The
Wi-Fi connection is being re-established
If the Center is reset and Stations are not
reset:
6
On the Stations, enter Installation Mode
a. Remove the power plug of the Stations and
connect them to the power supply again
➜
Connecting to Center appears
b. On the remote control, press MENU to
enter Installation Mode
c. Press the navigation controls
3
or
4
and
2
to
enter Installation Mode
➜
The Stations start to connect to the Center
If a Station is reset and the Center is not:
7
On the Center, select HD mode and enter
Installation Mode
a. Press MENU to enter the menu screen
b. Press the navigation controls
3
or
4
and
2
to
enter Station Mgnt menu
c. Press
3
or
4
and
2
to select Add New
Station
➜
Searching for Stations starts
If both the Center and Stations are reset:
8
Select language and then enter installation mode.
9
Press STOP
Ç
on the Center when all the
Stations are found.
Helpful hint:
– After restoration to default settings, the network
mode will go back to Ad-Hoc mode.
14. Reset
pg001-pg068_WACS7000_Eng 2007.2.3 11:06 AM Page 60