Philips Streamium WACS7000, Руководство пользователя

Страница: 44 / 199

44
English
8.1 Tuning to radio stations
1
Connect the supplied FM wire antenna to the
Center and Station (see
3.Installation )
2
Check that the set is switched on or in standby
mode (see
5.Basic functions )
3
Press SOURCE once or more times to select
Radio
➜
Playback screen appears. Display shows:
Radio, the radio station frequency and a
preset number (if already programmed)
4
Press and hold
3
or
4
until the frequency in the
display starts running.
➜
The radio automatically tunes to a station of
sufficient reception. Display shows Searching
during automatic tuning
➜
If a station is received in stereo, is shown
➜
When you are receiving an RDS station,
is shown
5
Repeat Step 3 if necessary until you find the
desired radio station
●
To tune to a weak station, press
3
or
4
briefly
and repeatedly until optimal reception is
detected.
8.2 Storing preset radio stations
You can store up to 60 preset radio stations in
the memory.
8.2.1 Autostore: automatic programming
Autostore automatically starts programming
radio stations from Preset 1. Available stations
are programmed in the order of radio
frequencies: RDS stations followed by FM
stations. A maximum of 10 RDS stations will be
stored (from Preset 01 to Preset 10).
1
To select Autostore radio,
a. Press MENU
b. Use the navigation controls
3
or
4
and
2
to
select Autostore radio
➜
Display shows: Autostore Please wait...
➜
After all the stations are stored, the first
autostored preset station will then play
automatically.
8.2.2 Manual programming
1
Tune to your desired radio station (see 8.1
Tuning to radio stations ).
2
Press PROGRAM on the remote control.
➜
The display shows:
PORTABLE
SEARCH
SAME ARTIST SAME ARTIST
SMART EQ
DBB
PORTABLE
SEARCH
SAME ARTIST
SMART EQ
DBB
8. FM radio
pg001-pg068_WACS7000_Eng 2007.2.3 11:05 AM Page 44