English
3
Use the navigation controls
3
or
4
and
2
to
select
Select Server
➜
On the Station ‘s display shows the list of
servers connected
➜
Server not found
appears if there is no
UPnP server in the network
If the WAS5 Station has never connected to
Center or server,
1
Check your UPnP-enabled PC is switched on
2
Connect WAS5 to the power supply
SLEEP
You can set a certain period of time after which
the Center or Station will switch to standby.
1
On the remote control, press
SLEEP
repeatedly to select the desired time period
options (in minutes):
➜
Display shows in sequence:
Sleep 15, 30,
45, 60, 90, 120, Off
➜
Display shows the selected option briefly and
returns to its previous status. The icon
Z
Z
appears.
2
To view the time countdown to the standby
mode, press
SLEEP
again.
To deactivate the sleep timer
, press
SLEEP
until
Sleep Off
is displayed.
or
Press
STANDBY-ON
/
ECO POWER
to
switch the set to standby (or
y
on the remote
control)
SAME ARTIST
SMART EQ
AUX/ UPnP/SLEEP
To play music on a UPnP server
➜
On the Station ‘s display shows music stored
on PC
1
Check the WAS5 Station is switched on or
standby mode
2
Check the WAS5 Station is connected to a
UPnP server
➜
On the Station ‘s display shows PC’s music as
it does on PC
Helpful hints:
– On WAS5’s UPnP mode,
MUSIC FOLLOWS
ME
and
MUSIC BROADCAST
are disabled.
WACS5_Eng/37
8/3/2005, 15:13
40
