EN
21
Starting the Configuration Wizard
The Configuration Wizard will start automatically the first time you connect your
SLA5520 to the power.
To start the Configuration Wizard at a later time:
1
Press SETTINGS (X) on the remote control to display the
Settings
menu.
2
Press
4
(X)
until ‘Configuration Wizard’ is highlighted. Press
2
.
3
Press
2
(X)
on the remote control to go to the next screen and begin the setup
process.
Note: This process requires you to know some technical details on how your wireless
network is set up. If you are unsure of any of the settings, consult the person
who set up your wireless network or refer to the appropriate network
documentation.
Changing network settings
Entering Text in Edit Mode
For some settings (Example:
SSID, WEP code, WPA code
) you will need to enter
text characters in Edit mode. In edit mode you can use the remote control digit
buttons to enter text, similar to the way you enter text messages on a mobile phone.
The following special functions are also available in Edit mode:
Function
1
/
2
Move the cursor forward one character at a time.
Press at the end of a line to complete the changes and move to the
next item.
∞
Backspace to delete one character at a time.
3
/
4
Scroll through the ASCII character list.
Selecting a Network
If the LCD screen displays ‘Select Network’:
1
If more than one wireless network is available, press
4
to choose the
netwerk
name (SSID)
for the wireless network and press
2
.
- OR –
Check that the
netwerk name (SSID)
displayed for the single wireless network
found is correct and press
2
.
2
Otherwise, press
4
to choose ‘
Other (Advanced)
’ and press
2
.
Enter the
netwerk name (SSID)
(see ‘Entering Text in Edit Mode’).
The
netwerk name (SSID)
must contain between 2 and 32 alphanumeric, case-
sensitive characters.
Press
2
when you have finished entering the
netwerk name (SSID)
.
SLA5520_Eng*.qxd 02-06-2005 16:44 Pagina 21
Содержание Streamium SLA5520
Страница 1: ...SLA5520 User manual 4 EN ...
