Then enter the code noted in
step 3, using the digit keys (e.g.
).
–
The
key will now blink twice and
then remains lit.
If the key blinks once for an
extended period, the code has not been entered properly or
the wrong code has been entered.
Start again from step 2.
4
Press and hold
the
key and
immediately
release it when the TV
switches off (standby).
This may take up to 30 seconds.
5
Turn on the TV and check if you can
operate all functions on your TV
with the SRP 3004.
–
If the TV responds to all of the key commands, the SRP 3004
is ready for use.
•
If a key does not function (properly), try repairing the key.
For this, see ‘Repairing a key’.
6
Press the
key
twice
to exit
setup mode and save your settings.
–
When no key is pressed for 2
minutes or more the remote control
will exit setup mode automatically.
•
If the device does not respond at all or not to all of the
key commands or if you cannot find the code for your
brand, enter ‘0, 0, 0, 0’ in step 3 and continue with step
4. The remote control will now search the full database
for a code that works with your TV. Full database search
may take up to 15 minutes.
Setting the remote control for other devices (STB (set-top
boxes for cable box, satellite receiver, Digital Video
Broadcasting Terrestrial device - DVB-T) DVD player/recorder
and VCR).
1
Make sure the device is turned on, fully operational and able
to respond to remote control commands. E.g. insert a video
cassette in the VCR or a disc in the DVD player/recorder.
2
Then follow steps 2 to 6 of ‘Setting the remote control for
TV’.
5
E
n
gl
is
h
In
st
al
lin
g
th
e
r
e
m
o
te
c
o
n
tr
o
l
EN
30 sec.
2 x
SRU3004_10_95_Transfer:125254c4_SRU5110_86 12-06-09 14:14 Pagina 5
