Speech Processing
Solutions
Workbook
SpeechControl4Mac 3.3
Page:
24 of 28
Q.: Can I program all Dragon commands on my SpeechMike buttons?
A.:
SpeechControl4Mac offers the most important functions for Dragon Dictate 5 in its feature set.
Specific macros or commands cannot be programmed to the SpeechMike buttons.
Please use the spoken commands instead.
Q: Will it be delivered automatically with the HW?
A.:
No, SpeechControl4Mac can only be downloaded from the
SpeechMike support pages
Q: Will it be possible to configure the Digital Pocket Memo (DPM)?
A.:
SpeechControl4Mac can configure Philips SpeechMikes III and SpeechMike Premium only.
Q: Can you set the buttons to toggle / continuous
A.:
Yes, this can be done with the “button pressed” and “button released” event.
Q: What versions of Dragon Dictate does SpeechControl4Mac work with?
A.:
SpeechControl4Mac 3.3 works with Dragon Dictate 5.
Q: How much does this tool cost?
A.:
There is no extra charge for SpeechControl4Mac.
Q: Where can we get this tool from? Is it on the web?
A.:
SpeechControl4Mac can be downloaded from the
Philips Speech Processing download area
.
Q: Can existing SpeechMike users obtain the tool from our web site at no extra cost?
A.:
Yes, it is downloadable for SpeechMike III and SpeechMike Premium from the
SpeechMike
support site
.
Q: Is there a minimum SpeechMike firmware version required for version use on a Mac?
A:
Yes, SpeechMike III requires firmware V1.14 or later. In case a SpeechMike III with an older
firmware is connected you will be asked to upgrade your firmware.
If you click “Upgrade” SpeechControl4Mac will upgrade the SpeechMike III firmware to version 1.14.
Q: Does it matter in which order Dragon Dictate 5 or SpeechControl4Mac are installed?
A:
The installation order does not matter.
If Dragon Dictate 5is already there you can also install SpeechControl4Mac afterwards and all works
fine.
Back to
Table of Contents
