Speech Processing
Solutions
Workbook
SpeechControl4Mac 3.3
Page:
10 of 28
DEVICE CONFIGURATION
General
On the
Device
page you can customize the behavior of the active device, configure its buttons and
upgrade its firmware. After starting SpeechControl, the current
settings
of the connected device are
automatically loaded
and displayed in the UI.
You can also load the settings from the device manually by clicking the
button.
After changing the settings in the UI, you can save them to the device by clicking the
button.
By clicking
, the factory settings for the connected device are loaded and displayed in
the UI.
After that, click
Save to device
to save the factory settings to the connected device.
D
Note:
It is not possible to configure more than one connected device at once. When connecting a
second device to your Mac, it automatically becomes the active, configurable device.
Following settings are available on the
Device
page:
D
Note:
The availability of the above settings depends on the type of the active device.
