sPDS-480ca Product
Guide
7
Connect the sPDS-480ca to Line Power
1. Connect the IEC power cable to the inlet in the back of the sPDS-480ca.
2. To secure the cord, tighten the locking clamp around the
inlet
with a Phillips
screwdriver.
3. Connect the power cable to line power.
Connect the sPDS-480ca to Fixtures
Make sure the device is powered OFF before connecting to fixtures.
1. Connect the leader cables or Flex strands to an available port on the back of the
device. Ports are labeled 1 through 8.
2. Power the device ON.
Note that before you can control the connected fixtures, you must discover fixtures
using either the sPDS-480ca device’s on-board menu (described in the next section),
QuickPlay Pro software, or the discover functionality in the software for Light
System Manager or Video System Manager.
Discovering
fi
xtures
fi
nds the quantity of connected
fi
xtures and registers them on
your power / data supply.
E
You can download QuickPlay Pro from
www.colorkinetics.com/support/ addressing/
