background image

5

English

Risk of injury or damage to the SoundBar!

 

For wall-mountable products, use only the 

supplied wall mount bracket. Secure the 

wall mount to a wall that can support the 

combined weight of the product and the 

wall mount. Koninklijke Philips Electronics 

N.V. bears no responsibility for improper 

wall mounting that results in accident, injury 

or damage.

 

Never place the product or any objects 

on power cords or on other electrical 

equipment.

 

If the product is transported in 

temperatures below 5°C, unpack the 

product and wait until its temperature 

matches room temperature before 

connecting it to the power outlet.

 

Parts of this product can be made of 

glass. Handle with care to avoid injury and 

damage.

Risk of overheating! 

 

Never install this product in a confined 

space. Always leave a space of at least four 

inches around the product for ventilation. 

Ensure curtains or other objects never 

cover the ventilation slots on the product.

Risk of contamination!

• 

Do not mix batteries (old and new or 

carbon and alkaline, etc.).

• 

Remove batteries if they are exhausted or 

if the remote control is not to be used for a 

long time.

• 

Batteries contain chemical substances, they 

should be disposed of properly.

Risk of swallowing batteries!

• 

The product/remote control may contain a 

coin type battery, which can be swallowed. 

Keep the battery out of reach of children at 

all times!

3 Important

Read and understand all instructions before you 

use your SoundBar. If damage is caused by failure 

to follow instructions, the warranty does not apply.

Safety

Risk of electric shock or fire!

• 

Never expose the product and accessories 

to rain or water. Never place liquid 

containers, such as vases, near the product. 

If liquids are spilt on or into the product, 

disconnect it from the power outlet 

immediately. Contact Philips Consumer 

Care to have the product checked before 

use.

• 

Never place the product and accessories 

near naked flames or other heat sources, 

including direct sunlight.

 

Never insert objects into the ventilation 

slots or other openings on the product.

 

Where the mains plug or an appliance 

coupler is used as the disconnect device, 

the disconnect device shall remain readily 

operable.

 

Disconnect the product from the power 

outlet before lightning storms. 

 

When you disconnect the power cord, 

always pull the plug, never the cable.

Risk of short circuit or fire!

 

Before you connect the product to the 

power outlet, ensure that the power 

voltage matches the value printed on the 

back or bottom of the product. Never 

connect the product to the power outlet if 

the voltage is different.

EN

Содержание SoundBar CSS2113



















Отзывы: