Philips SoundBar CSS2113, Руководство пользователя

Страница: 13 / 18

13
English
9 Troubleshooting
Warning
•
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
Main unit
Standby indicator on the front panel blinks
continuously.
•
Your SoundBar does not support Dolby
or DTS encoded audio. Make sure that
you change the audio output of the TV or
device to ‘Standard’ or ‘PCM’ (see ‘Connect
audio from TV and other devices’ on page
9).
Sound
No sound from SoundBar speakers.
•
Connect the correct audio cable from your
SoundBar to your TV or other devices.
•
Make sure that you change the audio output
of the TV or device to ‘Standard’ or ‘PCM’
(see ‘Connect audio from TV and other
devices’ on page 9).
•
On your SoundBar remote control, press
the Source buttons to select the correct
audio input.
•
Make sure that the SoundBar is not muted.
Press VOL +/- to restore the sound (see
‘Adjust the volume’ on page 10).
Distorted sound or echo.
•
If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Subwoofer
•
Impedance: 8 ohm
•
Speaker drivers: 130 mm (5.25”) woofer
•
Frequency response: 20 Hz-150 Hz
•
Dimensions (WxHxD): 165 x 240 x 295
mm
•
Weight: 2.6 kg
•
Cable length: 3 m
Remote control batteries
•
1 x CR2025
EN