This product contains a light source of energy efficiency class: E
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by
the manufacturer or his service agent or a similar qualified person.
Diconnect before serving, Luminaire has basic insulation between Low Voltage supply and control conductors.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the
instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its
entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of
torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembledbolts need to be
retightened again to the required torque specification to assure maximum strength over lifetime.
foil needs to be removed
Diagonal mounting
A
960-1170
660-870
A
L600
210-350
A
Mounting distance
30
45
8
8
2
Replacement of Silicone Plug(optional)
New Silicone Plug
Ø12
-
14mm
Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/LED
