Philips SL ParBlazer 100 UV, Инструкция по установке и эксплуатации

Страница: 9 / 24

Connecting to the DMX512 Network 7
3. Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple SL ParBlazer 100 UVs together (up to 32 luminaires
)
in
"daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector
on the first SL ParBlazer 100 UV. Another cable runs from the other DMX connector on the first unit to a DMX
connector on the next SL ParBlazer 100 UV (or DMX512 device to be controlled).
Figure 4 : SL ParBlazer 100 UV DMX512 Input / Output Connections
Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1 "DMX CONTROL" on page 13 . For SL ParBlazer 100 UV DMX Mapping, refer to .
Figure 5: SL ParBlazer 100 UV- DMX512 Connections
Luminaire
DMX512
DMX512 (
out from first
to second luminaire)
DMX512 (out to the next
(from console or
control device)
DMX512 Conections
Note: Remaining pins on each connector are not used.
Installation & User’s Manual SL ParBlazer 100 UV
luminaire or DMX512 controlled
device)
DMX512 Signal
Common (Drain)
DMX512-
XLR Pin Color
1
2
3
Red
White
Black
DMX
512 /
RDM Input
D
MX512/
RDM Output