Philips Senseo HD7820, Руководство пользователя

Страница: 12 / 74

interrupted the brewing process, the machine will not complete the
interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this will
cause the machine to draw in air. When this happens, the next cup will
only be partly filled.
Types HD7822/HD7820 only: if the cups are only half full when the
machine stops brewing, there was not enough water left in the water
reservoir to brew two cups. To obtain two full cups, fill the water
reservoir and press the 1-cup button
q
. The two cups will then be filled
completely.
Note: If you only get a small quantity of coffee or no coffee at all out of the
machine, you have not flushed the machine properly before first use. As a
result, the boiler is not or not completely filled. Flush the machine properly
(see chapter ‘Preparing the machine for use’) before you brew another cup of
coffee.
10 Remove the coffee pod(s) after use by lifting the pod holder out of
the machine and emptying it.
Be careful when doing this, for there may still be some water/coffee on the
coffee pod(s).
Tips
By rinsing the pod holders, the coffee collector and the coffee spout
regularly, you will make sure that the coffee always tastes optimally.
The SENSEO
®
coffee will taste best if you stir it before drinking it.
If you intend to make another cup of SENSEO
®
coffee later, just
leave the coffee machine switched on. The machine will automatically
switch itself off after 1 hour.
Cleaning
Never immerse the SENSEO
®
coffee machine in water.
Never clean the machine by flushing it with the lid open.
1 Always unplug the machine before cleaning it.
2 Clean the outside of the machine with a moist cloth.
Remove the coffee collector.
4 Take the coffee spout out of the machine by sliding it upwards.
The coffee spout can only be taken out after the coffee collector has been
removed.
,
,
,
EnglisH
12