background image

FEB 2015         © 2012 Philips Selecon All Rights Reserved 

LIMITED WARRANTY 

 

Philips Selecon warrants its fixtures against defects in materials or workmanship.  The 

term of this warranty is based on the product usage and is from the date of delivery. 

 

Usage: Architectural, Display Term - Three Years 

 

Architectural, Display relates to typical usage such as display lighting in a Museum viz:  
10 – 12 hrs per day, seven days per week. 
 
This warranty is void in any of the following circumstances:  (a) The fixture has been misused, neglected, damaged or 
abused. (b) The fixture has been improperly installed, operated, repaired or maintained.  (c) The fixture has been modified.  
(d) The fixture has been connected to other equipment with which it is not compatible.  (e) The fixture has been used or 
stored in conditions outside its electrical or environmental specifications.  (f) The fixture has been used for purposes other 
than for which it was designed.  (g) The fixture has been used outside its stated specifications and operating parameters. 

Correct installation of the luminaire is the owner’s responsibility. 

To assert a warranty claim, complete the Philips Selecon Return Authorisation Form (available from Philips Selecon).  Return 
the luminaire to Philips Selecon or its authorised agent. 

If Philips Selecon accepts the warranty claim, Philips Selecon will provide, or arrange for, service, repair or replacement as 
Philips Selecon shall determine in its sole discretion.  Philips Selecon shall bear the cost of such service, repair or 
replacement.  However, the owner shall bear the cost of freight and insurance on the luminaire, both ways.  If Philips 
Selecon does not wish to service, repair or replace the defective luminaire, it shall refund the purchase price. 

Philips Selecon’s sole responsibility is to repair, replace or service a luminaire subject to a valid warranty claim.  Under no 
circumstance will Philips Selecon be liable for direct, indirect, incidental, special or consequential costs or damages, 
including dismantling and re-installation costs, loss of operations or profits, to the maximum extent permitted by law. 

Philips Selecon accepts no liability for personal injury or property damage resulting from failure to heed relevant operating 
and safety procedures specified by Philips Selecon or imposed by law. 

This is an express warranty.  Philips Selecon disclaims any other express or implied warranties, including warranties of 
merchantability or fitness for purpose, to the maximum extent permitted by law. 

Some jurisdictions do not allow limitations or disclaimers of implied or statutory warranties.  Some jurisdictions do not allow 
disclaimers or exclusions of consequential or incidental damages.  Therefore, the above disclaimers, limitations and 
exclusions may not apply in all jurisdictions in which Philips Selecon sells its luminaires. 

This warranty gives the owner specific legal rights.  The owner may have other rights or remedies pursuant to the laws in its 
territory.  Nothing in this limited warranty should be construed as limiting or restricting any other statutory right or remedy of 
the owner, except for such limitations or restrictions herein as may be allowed by the law of the territory. 

Philips Selecon has a policy of continual product improvement and specifications are subject to change without notice. 

 

 

Manufacturer 

Philips Selecon, 19-21 Kawana Street, Northcote, Auckland 0627, New Zealand  

Ph: + 64 9 481 0100, Fax: + 64 9 481 0101 

www.seleconlight.com

 

Содержание Selecon Accent LED Beamshaper

Страница 1: ...f Electric Shock Always electrically isolate from mains power before cleaning or servicing CAUTION Replace the lenses if they have become visibly damaged to such an extent that their effectiveness has become impaired for example by cracks or deep scratches These fixtures are not suitable for outdoor use They are rated at IP20 8 0 8M The fixture should be at least 2 6 feet 0 8 metres away from the ...

Страница 2: ...perature 2700K 3000K 4000K nominal CRI 95 Typical Supply Current at 240V 350mA PAN TILT ADJUSTMENT FOCUSING THE BEAMSHAPER The variable beam of your Accent Beamshaper is altered by adjusting the front and rear lens in relation to each other To move the lenses simply loosen the lens locking knobs and move them into the desired position and then tighten the locking knobs The front lens defines the b...

Страница 3: ... your Philips Selecon distributor for assistance Only replace damaged parts with authorised Philips Selecon Accent spare parts N B Luminaire electrical cable your Accent LED Beamspot is fitted with special heat resistant flexible cable replace with genuine Accent spare part cable kit only please refer to your Selecon distributor Replacement cable kits are supplied complete with necessary terminal ...

Страница 4: ...oes not wish to service repair or replace the defective luminaire it shall refund the purchase price Philips Selecon s sole responsibility is to repair replace or service a luminaire subject to a valid warranty claim Under no circumstance will Philips Selecon be liable for direct indirect incidental special or consequential costs or damages including dismantling and re installation costs loss of o...

Отзывы: