Philips SE360 Скачать руководство пользователя страница 42

Страница: 42 / 44

No display

Ensure the batteries are charged.

•

Ensure there are power and phone

•

connections.

Bad audio (crackles, echo, etc.)

The handset is nearly out of range. Move

•

it closer to the base station.
The phone receives interference from

•

the nearby electrical appliances. Move the
base station away from them.
The phone is at a location with thick

•

walls. Move the base away from them.

The handset does not ring.

Ensure the handset ringtone is turned on.

When I see “Waiting...” on the screen, what is
happening with the phone?

The phone is recalling the memory of the
phonebook and call log. Both information are
stored in the base station. Then the handset
retrieves the data from the base station after
a few seconds. When you press

call ID

Ph.Book

, the

call log/phonebook information is displayed on
the handset.

The caller ID does not display.

The service is not activated. Check with

•

your service provider.
The caller’s information is withheld or

•

unavailable.

I cannot make/answer a 2nd call, what do I do?

Service is not activated. Check with your

•

service provider.
Ensure the recall duration is selected

•

correctly.

Note

If the above solutions do not help, disconnect

•

the power supply from both the handset and
base station. Try again after 1 minute.

17 Frequently

asked questions

The signal icon ﬂashes.

The handset is out of range. Move it

•

closer to the base station.

If the handset displays

[UNREGISTERED]

Tip

For more information, see “Register the

•

handsets” on the Advanced settings section.

IF I fail to register the additional handsets to
the base station, what do I do?

Your base memory is full. Unregister the unused
handsets and try again.

No dialing tone

Check your phone connections.

•

The handset is out of range. Move it

•

closer to the base station.

No parking tone

The handset is not placed properly on the

•

cradle.
The charging contacts are dirty.

•

Disconnect the power supply ﬁrst and
clean the contacts with a damp cloth.

I cannot change the settings of my voice mail,
what do I do?

The voice mail service is managed by your
service provider but not the phone itself.
Contact your service provider to change the
settings.

The handset on the charger does not charge.

Ensure the batteries are inserted

•

correctly.
Ensure the handset is placed properly on

•

the charger. The battery icon animates
when charging.
Batteries are defective. Purchase new

•

ones from your dealer.

Содержание SE360












































Результаты поиска

Содержание SE360

Отзывы:

Похожие инструкции для SE360

Бренды по названию

Популярные бренды

Philips SE360, Руководство пользователя

Результаты поиска

Содержание SE360

Отзывы:

Похожие инструкции для SE360

Бренды по названию

Популярные бренды