3
Select the input source you wish to listen to (analogue or digital):
–
In case of analogue input source: you can select Dolby Prologic II;
activation of Dolby Headphone is optional.
–
In case of digital input source: Dolby Digital or DTS will be activated
automatically, together with Dolby Headphone.
4
In case you activate Dolby Headphone you can toggle between the
3 modes and bypass mode.
5
The green "transmit" LED of the transmitter lights up if receiving an audio
signal.
–
Pressing the ‘transmit’ button can disable the transmitter function.
6
In case you want to listen to the wireless headphone:
–
Switch on the wireless headphone.
–
It will tune automatically to the most recently used transmission channel.
–
In case the headphone does not tune properly to the transmitter, then
press the tuning button.
–
Adjust the volume to the desired level with the headphone volume
control.
–
Adjust treble and bass as desired by pressing the dedicated buttons on
the headphone’s control panel.
7
In case you want to listen to a corded headphone:
–
You can connect up to 2 corded headphones to the base station.
–
Adjust the volume on the base station: this will have no effect on the
wireless headphone.
–
Adjust the bass as desired by pressing the DBE button on the base
station: this will have no effect on the wireless headphone.
ENGLISH
36
XP SBC HD 1500/17 for USA 14-01-2004 13:34 Pagina 36
