58
Problem
Possible cause
Solution
The SmartClean
system does not
work when I
press the on/off
button.
The SmartClean
system is not
connected to the
mains.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
The shaver
is not fully
charged after I
charge it in the
SmartClean
system.
You have not placed
the shaver in the
SmartClean system
properly.
Make sure you press the
shaver in the SmartClean
system until it locks into
place and press down the
top cap.
I replaced
the shaving
heads, but the
replacement
reminder symbol
is still showing.
You have not reset
the shaver.
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
‘Replacement’).
A shaving
head symbol
had suddenly
appeared on the
display.
This symbol is
a replacement
reminder.
Replace the shaving heads
(see chapter ‘Replacement’).
ENGLISH
5000Series_EN_A6_CS6new.indd 58
15/05/15 11:06