Guarantee restrictions
The shaving heads (cutters and shaving guards)
are not covered by the terms of the international
guarantee because they are subject to wear.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit
www.philips.com/
support
for a list of frequently asked questions or
contact the Consumer Care Centre in your country.
Problem
Possible cause
Solution
The shaver does
not shave as well
as it used to.
The shaving heads are
damaged or worn.
Replace the shaving
head holder (see
chapter ‘Replacement’).
Long hairs obstruct the
shaving heads.
Clean the shaving heads
by following the steps
of the extra-thorough
cleaning method (see
chapter ‘Cleaning and
maintenance’).
Specific types only: The
Jet Clean System has
not cleaned the shaver
properly, because the
cleaning fluid in the
cleaning chamber is
soiled or the cleaning
fluid level is too low.
Clean the shaver
thoroughly before
you continue shaving.
If necessary, clean
and refill the cleaning
chamber (see
chapter ‘Cleaning and
maintenance’).
ENGLISH
57
