34
Maintenance mode in console software
The console has built in maintenance/diagnostic software. The software
will allow you to change the console settings from English to Metric and
turn off the beeping of the speaker when a key is pressed for example. To
enter the maintenance mode press and hold down the start, stop and
confirm key. Keep holding the keys down for about 2 seconds and the
message window will display “maintenance mode”. Press the confirm key
to access the menu below:
• Key test
- Will allow you to test all the keys to make sure they are
functioning. Press all the keys one at a time.
• Display test
- Tests all the display functions by lighting each LED light
sequentially.
• Functions (press confirm key to access menu)
- Units
Set to English (imperial units) or metric display readings. The
default is imperial, which means data such as bodyweight and
height will be in pounds and inches.
- Pause mode
Turn on allow 5 minutes of pause, turn off to have the console
pause indefinitely.
- Odometer reset
Resets the odometer to zero (Time and distance)
- Beep sound
Turn on or off the speaker to silence beeping sound.
- LED brightness
Adjust the LED brightness.
1
1
1
1
1
