Mechanical Instructions
4.
4.3.12 LCD Panel
Important:
Be sure to work in a dust free environment during
the following activities. In addition, the use of (fabric) hand
gloves is advised.
Figure 4-4 LCD panel disassembly
1.
First remove front cover, back cover as described earlier.
2.
Place the set in the service position, see
3.
Remove the PSU as described earlier.
4.
Do NOT forget
to unplug the LVDS connector [1] from the
SSB.
Important:
Be careful, as this is a very fragile
connector!
5.
Unplug the connectors from the backlight inverters [2].
6.
Release connector [3] to the main power switch.
7.
Release the cabling to the keyboard and the IR/LED panel.
8.
Now remove all screws at the side of the surrounding rims.
9.
Gently remove the rims.
10. Remove the screws [4].
11. Now gently lift the complete subframe from the LCD panel.
When defective, replace the whole unit.
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See
1
8
4
3
0_102_090211.ep
s
.ep
s
090211
2
2
2
2
1
4
4
4
4
3
4
4