Philips QC5132, Руководство пользователя

Страница: 28 / 36

4 Tilt the appliance in such a way that only one edge of the cutting
element touches the hair ends.
5 Only cut the hair ends. The hairline has to be close to the ear.
6 To contour the neckline and the sideburns, turn the appliance and
make downward strokes.
7 Move the appliance slowly and smoothly. Follow the natural hairline.
Clipping with the thinning comb (Thinning)
Make sure you use the right comb. If you use the hair clipping comb
(REGULAR) instead of the hair thinning comb (THINNING), the
appliance will clip all hair to the same length.
With the thinning comb, you can give your haircut a natural look. It -
also allows you to create a smooth transition between two different
hair lengths.
- The thinning comb cuts only half of the hair that enters the comb,
which results in a natural look.
Thinning an entire haircut
We advise you not to use the thinning comb for very short haircuts.
1 Slide the hair-thinning comb into the guiding grooves of the appliance
(‘click’).
Make sure that you slide the arms of the comb properly into the grooves
on both sides.
2 Set the thinning comb to a lower setting than the one you just
used for the regular hair clipping comb to create the haircut.
Note: How much lower the setting for the thinning comb should be depends on
your hairstyle and hair length. Never use the thinning comb at a setting that is
lower than half the setting you used to create the haircut. For example, if you
used the large clipping comb at 30mm to create the haircut, do not use the
thinning comb at a setting lower than 15mm.
REGULAR THINNING
English
3 Slide the on/off slide upwards to switch on the appliance.
4 Move the hair thinning comb through the hair.
Make sure that the thinning comb only touches each spot once,
otherwise it cuts all the hair to the set hair length.
Creating a smooth transition between two hair lengths
If you have cut your hair to two different lengths, you can use the thinning
comb to create a smooth transition between these two lengths.
1 Slide the hair-thinning comb into the guiding grooves of the appliance
(‘click’).
Make sure that you slide the arms of the comb properly into the grooves
on both sides.
2 Set the thinning comb to a hair length setting that is halfway between
the two hair length settings you used to create the haircut.
For instance, set the thinning comb to 15mm if you have cut the top part
of the haircut to a length of 20mm and the bottom part of the haircut to a
length of 10mm.
3 Move the thinning comb upwards through the transition between
the two lengths.
Make sure that the thinning comb only touches each spot once,
otherwise it cuts all the hair to the set hair length.
Cleaning
Keep the appliance and the adapter dry. Only clean the appliance and the
adapter with the cleaning brush supplied.
Never use compressed air, scouring pads, abrasive cleaning agents
or aggressive liquids such as alcohol, petrol or acetone to clean the
appliance.
Do not use any sharp objects to clean the appliance.
Clean the appliance after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 To remove the comb, press the length setting selector, move the
comb upwards and then pull it off the appliance. Clean the comb
with the cleaning brush supplied.
English
27