Clipping with hair clipping comb (REgUlAR)
1
Comb your hair with a styling comb in the direction of hair growth.
2
Slide the hair clipping comb (REGULAR) into the guiding grooves of
the appliance (‘click’).
Make sure that you slide the arms of the comb properly into the grooves
on both sides.
3
Press the length setting selector (1) and then move the hair clipping
comb up or down (2) to set the desired length setting.
The corresponding hair length is visible on the side of the comb.
,
length settings
With the hair clipping comb attached, the appliance can cut hair to 10
different lengths:
Hair lengths in mm
Hair lengths in inches
3
1/8
5
1/5
7
2/7
9
1/3
11
3/7
13
1/2
15
3/5
17
2/3
19
3/4
21
5/6
2
1
English
4
Slide the on/off slide upwards to switch on the appliance.
5
Place the hair clipping comb on the scalp and move the appliance
through the hair slowly.
Tips
Start clipping at the highest length setting of the hair clipping comb and
-
reduce the length setting gradually.
Write down the length settings you have used to create a certain
-
hairstyle as a reminder for future clipping sessions.
To clip in the most effective way, move the appliance against the
-
direction of hair growth.
- Since hair grows in different directions, you need to move the appliance
in different directions as well (upward, downward or across).
Make overlapping passes over the head to ensure that the appliance
-
catches all the hairs that need to be cut.
Make sure that the fl at part of the hair clipping comb is fully in contact
-
with the scalp to obtain an even clipping result.
To achieve a good result with curly, sparse or long hair, you can use a
-
styling comb to guide the hair towards the appliance.
Regularly remove cut hair from the hair clipping comb. If a lot of hair
-
has accumulated in the comb, remove it from the appliance and blow
and/or shake the hair out of it.
Clipping without hair clipping comb
You can use the appliance without hair clipping comb to clip your hair very
close to the skin (0.5mm) or to contour the neckline and the area around
the ears.
1
To remove the hair clipping comb, press the length setting selector
(1), move the comb upwards and then pull it off the appliance (2).
2
Comb the hair ends over the ears before you start to contour the
hairline.
3
Slide the on/off slide upwards to switch on the appliance.
2
1
English
Clipping with hair clipping comb (REgUlAR)
1
Comb your hair with a styling comb in the direction of hair growth.
2
Slide the hair clipping comb (REGULAR) into the guiding grooves of
the appliance (‘click’).
Make sure that you slide the arms of the comb properly into the grooves
on both sides.
3
Press the length setting selector (1) and then move the hair clipping
comb up or down (2) to set the desired length setting.
The corresponding hair length is visible on the side of the comb.
,
length settings
With the hair clipping comb attached, the appliance can cut hair to 10
different lengths:
Hair lengths in mm
Hair lengths in inches
3
1/8
5
1/5
7
2/7
9
1/3
11
3/7
13
1/2
15
3/5
17
2/3
19
3/4
21
5/6
2
1
English
4
Slide the on/off slide upwards to switch on the appliance.
5
Place the hair clipping comb on the scalp and move the appliance
through the hair slowly.
Tips
Start clipping at the highest length setting of the hair clipping comb and
-
reduce the length setting gradually.
Write down the length settings you have used to create a certain
-
hairstyle as a reminder for future clipping sessions.
To clip in the most effective way, move the appliance against the
-
direction of hair growth.
- Since hair grows in different directions, you need to move the appliance
in different directions as well (upward, downward or across).
Make overlapping passes over the head to ensure that the appliance
-
catches all the hairs that need to be cut.
Make sure that the fl at part of the hair clipping comb is fully in contact
-
with the scalp to obtain an even clipping result.
To achieve a good result with curly, sparse or long hair, you can use a
-
styling comb to guide the hair towards the appliance.
Regularly remove cut hair from the hair clipping comb. If a lot of hair
-
has accumulated in the comb, remove it from the appliance and blow
and/or shake the hair out of it.
Clipping without hair clipping comb
You can use the appliance without hair clipping comb to clip your hair very
close to the skin (0.5mm) or to contour the neckline and the area around
the ears.
1
To remove the hair clipping comb, press the length setting selector
(1), move the comb upwards and then pull it off the appliance (2).
2
Comb the hair ends over the ears before you start to contour the
hairline.
3
Slide the on/off slide upwards to switch on the appliance.
2
1
English
26
3QC5132_EN_A6_CS3.indd 26
14.1.9 0:08:43 PM
Содержание QC5132
Страница 1: ...取 扱 説 明 書 保証書付 保証書は この取扱説明書の最終 ページについておりますので販売店 で記入を受けてください フ ィ リ ップス ヘアーカッター ヘアーカッター QC 品 番 ...
Страница 19: ...4 クリーニングブラシで刃を掃除します 5 クリーニングブラシで本体を掃除します 6 カチッと音がするまで 刃を本体に 押し込みます 18 ...
Страница 22: ...21 ...
Страница 23: ...REGULAR HQ8505 THINNING 2 3 1 4 5 6 7 11 10 8 9 English QC5132 22 ...
