1-4
power supply / general information
ECO-PLUS NiMH battery information (for versions supplied with the
rechargeable ECO-PLUS NiMH battery AY 3363)
r
echarging works only on players supplied with the rechargeable
ECO-PLUS NiMH battery AY 3363.
recharging the ECO-PLUS NiMH battery on board
1
insert the rechargeable ECO-PLUS NiMH battery AY 3363.
2
connect the mains adapter to the DC socket of the player and then to
the wall socket.
y
is pulsing.
•
recharging stops after a maximum of
7 hours, or when you start playback.
3
when the battery is fully recharged,
appears in the display.
notes:
– it is normal for the batteries to become warm during recharging.
– if the batteries become too warm, recharging will be interrupted for
approximately 30 minutes and
is displayed.
– to ensure proper recharging on board, take care that contacts are clean.
– use only the ECO-PLUS NiMH battery AY 3363.
handling instructions
•
recharging already charged or half-charged batteries will shorten their
lifetime. we therefore recommend that you let the rechargeable
ECO-PLUS NiMH battery run till it is completely empty before you
recharge it.
•
to avoid a short circuit, do not let the battery touch any metal object.
•
if the battery becomes empty soon after recharging, then either its
contacts are dirty or it has reached the end of its lifetime.
mains adapter (supplied or optionally available)
use only the AY 3170 power adapter supplied
with your product (4.5 V / 300 mA direct
current, positive pole to the centre pin). any
other product may damage the player.
1
make sure the local voltage corresponds to
the adapter’s voltage.
2
connect the adapter to the DC socket of the
player and to the wall socket.
note: always disconnect the adapter when you are not using it.
environmental information
• all redundant packing material has been omitted. we have done our
utmost to make the packaging easily separable into two mono
materials: cardboard and polyethylene.
• your set consists of materials which can be recycled if disassembled
by a specialized company. please observe the local regulations
regarding the disposal of packing materials, exhausted batteries and
old equipment.
headphones HJ050
•
connect the supplied headphones to the
p
socket of the player.
note:
p
can also be used for connecting this set
to your hifii system to adjust the sound and
volume, use the controls on the connected audio
equipment and on the cd player.
take care when using headphones
hearing safety:
listen at a moderate volume.
using headphones at high volume can impair your hearing.
traffic safety:
do not use headphones while driving or cycling as you
may cause an accident.
general information / cd play
cd player and cd handling
• do not touch the lens
A
of the cd player.
• do not expose the unit, batteries or cds to
humidity, rain, sand or excessive heat (caused
by heating equipment or direct sunlight).
• you can clean the cd player with a soft,
slightly dampened, lint-free cloth. do not use
any cleaning agents as they may have a
corrosive effect.
• to clean the cd, wipe it in a straight line from the center toward the
edge using a soft, lint-free cloth. a cleaning agent may damage the
disc! never write on a cd or attach a sticker to it.
• the lens may cloud over when the unit is moved suddenly from cold
to warm surroundings. playing a cd is not possible then. leave the
cd player in a warm environment until the moisture has evaporated.
• active mobile phones in the vicinity of the cd player may cause
malfunctions.
• avoid dropping the unit as this may cause damage.
in-car use (connections supplied or optionally available)
only use the AY 3545 or AY 3548 car voltage converter (4.5 V DC,
positive pole to the centre pin) and the AY 3501 car cassette adapter.
any other product may damage the set.
1
put the set on a horizontal, vibration-free and
stable surface. make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2
plug the voltage converter into the cigarette
lighter socket
(only for 12 V car battery,
negative grounding)
, then connect the wired
end with 4.5V DC input socket on the set.
3
i
f necessary, clean the cigarette lighter socket
to obtain a good electrical contact.
4
turn down the volume and connect the cassette adapter plug to
p
on
the set.
5
carefully insert the cassette adapter into the car radio’s cassette
compartment.
6
make sure the cord does not hinder your driving.
7
decrease the volume on the set if necessary. start playback on the
set and adjust the sound with the car radio controls.
•
always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
notes: if your car radio has a LINE IN socket, it is better to use it for
the car radio connection instead of the cassette adapter. connect the
signal lead to this LINE IN socket and to
p
on the set.
4,5 V DC
12 V DC
INSTRUCTION FOR USE
