Philips ProTouch GC617, Руководство пользователя

Страница: 35 / 44

35
Problem
Possible cause Solution
Steam does
not stop
automatically
after placing the
steamer head
onto the holder. Steamer head is
not placed onto the
holder properly. Place the steamer head
properly (refer to
). It
is normal for steam to
come out continuously for
a short while even if the
steamer head is placed
properly.
Steam boost
cannot be
activated. You did not press
and hold the steam
selection button on
steamer head for at
least 2 seconds. Press and hold steam
selection button for at
least 2 seconds.
You have activated
the steam boost too
frequently. Wait approximately
30 seconds before the
next activation.
The board cover
becomes wet or
there are water
droplets on the
garment during
steaming. Steam has
condensed on the
board cover after a
long steaming
session. Leave it to dry before
storage. Replace the board
cover if the foam material
has worn out.
Purchase a new board
cover from a Philips
Authorized Service Center.
Board is shaky
during use. The poles are not
installed properly or
the board is not
secured onto the
poles.
Refer to for correct
installation.
The top and bottom
parts of the board
are not fully
inserted. Insert the two parts fully
until you hear a “click”
sound. Refer to
.