With all cables concealed through a hole in the surface:
1
Cut out the Ethernet break-out plates
at
the front (1) and break-out plate at the
bottom (3) of the docking station, using a knife.
2
Guide
the
Ethernet cable
and the
power cable
through the holes in the docking
station.
3
Attach a Phoenix connector
to the power cable, exactly as illustrated, and
plug
it
in the other Phoenix connector inside the docking station.
4
Plug the Ethernet cable
in at the back of the Control Panel.
5
Look for the
screw
in the bottom plate
of the docking station.
6
Use this screw and the screw hole at the back of
the Control Panel to
attach the Control Panel
to the
docking station
.
Note
When you choose a fixed power connection, always attach the Control Panel to the docking
station to avoid disconnecting the cables.
10
+
–
ENGLISH
TSU9800 Starter’s Guide
1
3
