Philips ProCare HP8619, Руководство пользователя

Страница: 12 / 15

Note:If you want to change the temperature or time setting during
application, you might have to deactivate the Key Lock by pressing the
Unlock Key Lock Function ( ).
3
Brush to de-tangle your hair. Depending on your desired results, take
a hair strand between 2cm and 4cm (for loose waves take a thicker
strand, for tight curls take a thinner strand).
4
Hold the curler horizontally and point it away from your head and
face. Position your thumb/finger beside the Curl Ready Indicator
( ) but don’t press it yet. Start at the widest point of the barrel,
place the curler near the roots of the section and wrap the hair
around from root to tip.
5
Hold your hair tips at the Cool Tip ( ) with your fingers and press
the Curl Ready Indicator( ). When you hear the “beep”, the time
counting starts.
6
When your curl is ready, you will hear a “beep” alert three times.
7
Release the hair tip.
•
Repeat step 3-7 until all the hair is curled.
8
To finish, break up the curls with your fingers and wind each smaller
curl around your finger for extra definition.
After Use
1
Switch off the appliance and unplug it.
2
Place it on a heat-resistant surface until it cools down. You can also
hang it with the hanging loop ( ).
3
Remove hairs and dust from the barrel.
4
Clean the barrel with a damp cloth.
5
Caring for velvet material:
•
To ensure you can get the most out of the curler, DO NOT use
any form of wet goods (except for heat protection spray) before
and during use.