PREPARATIONS
Connections
Connecting headphones
Connect the headphones into the
n
jack of your set.
Connecting additional equipment
• Turn off your set before connecting to any additional equipment.
• You can connect the player to a TV or an amplifier to enjoy DVDs or karaoke.
AV OUT
Connect the desired device to this terminal
directly.
USB and SD card slots
You can play video/audio/picture files stored in a USB or
SD card by inserting it into the USB or SD card slot.
TIP
Make sure the metal contact of the card to be inserted is
facing down.
PREPARATIONS
Power supply
Using the AC / DC adaptor
Connect the supplied adapter to the set and the main
power supply (as shown).
TIP
To avoid damage to the player, switch off before plugging
or unplugging the AC adaptor.
Powering your remote control
1
Open the battery compartment. Remove the protective
plastic tab (first time users only).
2
Insert 1 x lithium 3V battery, type CR2025, then close
the compartment.
10
English
✔
CAUTION
- Batteries contain chemical substances, so they should be disposed of properly.
- Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
- Incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to burst.
- Remove the battery if the remote control is not to be used for a long time.
✔
AV OUT
AV OUT
AV OUT
TV
AV OUT
White
Red
Yellow
P001-019_PET988_12_Eng 2008.8.8 18:43 Page 10
