Philips PerfectCare Viva RI7035/34, Руководство пользователя, Страница: 9 / 20

Energy saving
Eco mode
By using the ECO mode (reduced amount of steam), you can save energy without compromising
on the ironing result.
1 To activate the ECO mode, press the ECO button. The green ECO light goes on. (Fig. 17)
2 To deactivate the ECO mode, press the ECO button again. The green light goes off.
Safety auto-off (specific types only)
The safety auto-off function automatically switches off the appliance if it has not been used for
5 minutes, to save energy.
Recycling
Do not throw away the appliance with the normal household waste at the end of its life, but hand it
in at an official collection point for recycling. By doing this, you help to preserve the environment.
Guarantee and support
If you need information or support, please visit www.philips.com.br/suporte or read the
separate worldwide guarantee leaflet.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance.
If you are unable to solve the problem with the information below, visit
www.philips.com.br/
supporte
for a list of frequently asked questions or contact the Consumer Care Centre in your
country.
Problem Possible cause Solution
The iron does not
produce any steam.
There is not enough water in
the water tank.
Fill the water tank beyond the MIN
indication. Press and hold the steam trigger
until steam comes out. It may take up to
30 seconds until steam comes out.
You have not pressed the
steam trigger.
Press and hold the steam trigger until
steam comes out.
The steam function has been
disabled until you have
performed the Calc-Clean
process.
Perform the calc-clean process to restore
the steam function (see chapter
‘IMPORTANT - Cleaning and
maintenance’).
The light of the
Calc-Clean button
flashes and/or the
appliance beeps.
This is the Calc-Clean
reminder.
Perform the Calc-Clean process within
1 hour after the Calc-Clean reminder is
given (see chapter ‘IMPORTANT - Cleaning
and maintenance’).
ENGLISH
9