Philips PerfectCare Viva RI7035/34, Руководство пользователя, Страница: 11 / 20

Problem Possible cause Solution
The ironing board
cover becomes
wet or water
droplets come out
of the soleplate.
Steam has condensed on the
ironing board cover after a
long ironing session.
Replace the ironing board cover if the foam
material has worn out. You can also add an
extra layer of felt material under the ironing
board cover to prevent condensation on
the ironing board.
You may have an ironing
board that is not designed to
cope with the high steam rate
of the steam generator.
Put an extra layer of felt material under the
ironing board cover to prevent
condensation on the ironing board.
Steam continues to
come out after I
release the steam
trigger.
Steam is generated in the
soleplate. When you release
the steam trigger, remaining
water is transformed into
steam. This is normal.
Release the steam trigger 2 to 3 seconds
before you place the iron back on the iron
platform or ironing board.
There is a strong
gush of steam
when I release the
steam trigger after
placing the iron on
the iron platform.
When the iron is tilted
upwards, remaining water is
collected and converted into
strong steam. This is normal.
Release the steam trigger 2 to 3 seconds
before you place the iron back on the iron
platform or ironing board.
Steam is weak. You do not press the steam
trigger continuously.
Keep the steam trigger pressed
continuously when you move the iron over
the fabric.
You use the ECO mode. For more steam, switch off the ECO mode
by pressing the ECO button. The green
ECO light goes off.
Steam does not
come out
immediately when I
press the steam
trigger.
Water is converted into
steam in the soleplate. When
you press the steam trigger, it
will take 1 to 2 seconds until
steam is generated and
released. This is normal.
Keep the steam trigger pressed
continuously when you move the iron over
the fabric.
ENGLISH
11