GC7011 - GC7040
15-18
8.4. Perform Self-Check mode Process Flow Chart
Refer TS tip #6
Refer TS tip #8
Refer TS tip #5
Refer TS tip #3
Refer TS tip #2
Press Power button
Check power meter:
2000 ˜ 2400W
Tilt iron to vertical
position with tip up
Refer TS tip #4
Refer TS tip #1
Press ECO button
Check Iron LED
Check LEDs
Check LEDs
Technician actions
Troubleshooting tips to refer
Press steam
trigger & hold
Check steam
trigger and pump
Check pump
and LEDs
Refer TS tip #7
Check Buzzer
Press Rinse button
Release steam trigger
ECO LED (green)
Rinse LED (orange)
Iron LED (blue)
Check zero-crossing
detection circuit
Power LED (blue)
fast blinks
Power LED stops blinking
and remains on
Check iron temperature
sensing circuit
ECO LED stops blinking
and remains on
Power LED (blue), ECO LED
(green) & Rinse LED (orange)
scrolling anti-clockwise
Power LED (blue), ECO
LED (green) & Rinse LED
(orange) fast blink
ECO LED (green) fast blink
Turn on Iron heater for 2
sec if iron is cold
System activities
Iron LED (blue)
fast blinks
* If turbo mode is available:
Power LED (blue) turns off &
Turbo LED (white) turns on
Rinse LED stops blinking and
remains On
Iron LED remains On
Pump turns on
Buzzer turns on
Rinse LED fast blinks
Pump stops
ECO LED (green) and
Rinse LED (red) fast blink
alternately
•
•
•
•
•
•
•
•
•
•
•
•
•
NOK
NOK
OK
OK
Entered
Self-Check mode
Turn On:
Self-Check mode
is completed
successfully
Repair Instruction