I
NSTALLING
Y
OUR
D
RIVE
2
7
Windows 95 directory’s COMMAND sub-directory.
You can locate this file by using the File
Manager’s Search command in Windows 3.x or
the Start menu’s Find command in Windows 95.
If the file is missing, contact your DOS or
Windows 95 distributor for a copy of it.
3. Insert the Installation diskette into a 3.5” floppy
drive.
4. Under DOS, change to the drive where the diskette
is inserted and type
.
Note: You must change to that drive before typing
the “INSTALL” command. Simply typing
A:\INSTALL or B:\INSTALL will not properly
install the driver.
5. Change the destination directory
!"
if
necessary and press
6. Change the name of the directory containing the
file if necessary and press
.
7. Reboot your computer.
If everything is okay, you can start using your CD-
ROM drive right away. Otherwise, make sure that
your CD-ROM drive has been correctly set as a
master device or a slave device (see
Appendix A for
instructions). If this still does not solve the
problem, contact your Philips distributor or
representative.
2.2.2 If You Are a Windows 95 User
Perform the following steps:
1. Install Windows 95, if it is not already installed.
2. Boot your computer. Windows 95 automatically
starts.
