Base station
39
To register a DECT peripheral
1- Go to
Base station
, validate
2- Scroll to
Enable registration
, validate
3- Enter the peripheral code and validate
4- Follow instructions in the peripheral manual (see page 41)
The line settings
It can be useful to change the line settings if your network operator is not the main national operator set
by default in the phone, especially for the Caller Display service (CLI).
To change the dial mode (country dependent)
1- Go to
Base station
, validate
2- Scroll to
Line settings
, validate
3- Select
Dial mode
, validate
4- Select
Tone/Pulse
, validate
To change the network type
1- Go to
Base station
, validate
2- Scroll to
Line settings
, validate
3- Scroll to
Network type
, validate
4- Select
PSTN/PABX,
validate
Registration
This feature allows you to register a DECT peripheral without keypad
Philips has designed this product to work on PSTN line and cannot guarantee the complete application
on ISDN network.
To change the recall type (country dependent)
1- Go to
Base station
, validate
2- Scroll to
Line settings
, validate
3- Scroll to
Recall type
, validate
4- Select
Short flash/Long flash
, validate
Note : This feature is useful when you are using operator services, with the
key.
Onis 380 master UK_indice2.qxd 12/08/03 16:51 Page 39
