ENGLISH
Cleaning the Shaver in the
SmartClean System Pro
C
◗
SmartClean System Pro has two phases: a
cleaning phase and a drying phase. There is a
progress bar that shows the progress of the
two phases.
◗
If the shaver does not contain enough power
for one (1) shave, the SmartClean System
may not work properly. Charge the shaver
in the SmartClean System before using the
SmartClean System to clean your shaver.
◗
If you use the shaver with shaving foam or gel,
quickly rinse under hot water before cleaning
in the SmartClean System.
1
Connect the small plug to the SmartClean
System. Connect the power plug into any
100V to 240V AC outlet. Use only the
power cord provided.
C
2
Press the top cap to open the SmartClean
System.
3
. Place the SmartClean System on a flat,
level surface. Make sure the seal has been
removed from the cleaning cartridge (see
‘Preparing SmartClean System For Use’).
C
4
Shake off any excess water from shaver
before placing in the SmartClean System.
27
14_S9721.indd 27
12/15/14 3:32 PM
Содержание Norelco
Страница 8: ...10 14_S9721 indd 10 12 15 14 3 32 PM ...
Страница 44: ...46 14_S9721 indd 46 12 15 14 3 33 PM ...