ENGLISH
25
ENGLISH
24
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
6
Replace the set back into the Razor Head
Assembly so that the ‘wings’ on the comb
fit within the brackets located towards the
center of the Assembly.
The set will only fit into the Razor Head Assembly
if the ‘wings’ are between the brackets. Make sure
that the two pointy edges of the head fit exactly
into the recesses.
7
Repeat the process for the other two sets
of cutters and combs.
8
Replace the frame.
C
9
Press down (1) and turn wheel clockwise
(2) until it locks into place.
10
Close the Razor Head Assembly.
Once A Month: Razor Heads
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Razor Cleaner, model
RC1776, or rubbing alcohol) and lubricated with
Philips Norelco Razor Lubricant, model AL80, or
one drop of mineral oil (in the center of the
head). This helps prevent wear of the shaving
heads.
8
You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1
Turn razor OFF, remove the charging plug
from the outlet and cord from the razor
or charging stand.
C
2
Press the razor head release button to
open the razor head assembly.
C
3
Turn the wheel counterclockwise (1) and
remove the retaining frame (2).
C
4
Remove and clean one set of cutters and
combs at a time.
C
5
Separate the cutter from the comb and
rinse clean under hot water.
