ENGLISH
C
7
After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
C
8
Put the shaving head back into the shaving
head holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
C
9
Hold the shaving head holder in your hand
and place the retaining ring on the shaving
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
10
Repeat the process for the other two
cutters and combs.
C
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make sure
you hear a 'click' indicating the retaining ring is fixed
into place.
C
11
Reinsert the hinge of the shaving head
holder into the slot of the shaving unit.
Close the shaving head holder (click).
23
ENGLISH
1
Turn shaver OFF.
C
2
Press the shaver head release button and
open the shaving unit.
C
3
Pull the shaving head holder off the
bottom part of the shaving unit.
C
4
Turn the retaining ring counterclockwise
(1) and lift it off the shaving head (2).
C
5
Remove one shaving head from the shaving
head holder. Remove the cutter from the
comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C
6
Clean the cutter and comb under warm
tap water.
22
1
2
1
2
